Boat Leveler N121100 12" x 11" Trim Tab Set
Color-coded wiring in 25' to 40' lengths with quick connects
fittings, meets federal standards for heat, pull and insulation,
making installation easy.
They are custom designed for Insta-Trim Boat Leveler Co., epoxy
sealed and humidity resistant, thereby preventing shorting out. The
solenoids lock the tabs in any position, eliminating driftback.
Barb type hose fittings provide tight, secure connections.
A powerhouse with coated wirings and a thermal overload that
resists temperature and amperage build-up. 1 3/4" stack windings
and top mounting eliminated oil leakage. The motor is mounted with
stainless steel nuts and bolts, and is easily disassembled.
Swivel type brackets allow cylinders to be mounted an adjusted
to any angle. Knockout pins act as shear pins it tab strikes an
Designed and engineered exclusively by Instatrim. The built-in
bypass is factory set at 400 P.S.I. tolerance held to .00025.
Amperage doesn't exceed 16 because the unit circulates oil, rather
than stalling out or trying to pump additional pressure.
4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a
built-in oil reservoir mounts easily with two screws. The filler is
located in front. Our cover protects the motor from occasional wash
Impact resistant, fiberglass reinforced nylon cylinders
eliminates expansion and resists ultra-violet rays. Two expanding
type seals, plus O-ring, eliminates high and low pressure leaks.
Barbed cylinder fitting and an inserted tubular rod prevents hose
blow-off and breakage.
A stainless steel spring retracts the cylinder when the boat is not
12 gauge 304 stainless steel trim tabs are available in
standard and custom lengths. They are guaranteed against
electrolysis, remaining strong and secure. Insta-Trim's hinges
prevent most spray and can be used for transom or bottom
Designed and manufactured exclusively for Insta-Trim with
nylon-reinforced webbing and protective PVC coating. Rated at 2000
lb. burst pressure, 15' of hose is supplied for your system.
Entering the transom 6" above the water line, the hoses are held
securely with hose trim.
Stainless steel clamps hold the hose to barb fitting at the
Rocker Type Controls
Mounted on the dash they are easy to operate. 2TP Micro switch
with silver contact points adjust the tabs for maximum control and
One pint of Insta-Trim biodegradable transmission oil, funnel and
mounting hardware is supplied.
Boat Leveler N121100
Details Product ID 6909 SKU DBC-16215 Brand Boat Leveler Quantity in stock 3 item(s) available Stock Classification Standard Stock Item - Product Is Brand New
Flat Rate Available UPS GND $9.95 Flat Rate Shipping
Price: $399.99 In Stock! Condition: New